- HOME
- List of Articles
- Ground Anchor Construction
Where Are the Mistakes in Ground Anchor Installation? The Complete Guide | How to Create Anchors That Won’t Come Loose: Drilling, Grouting, Tensioning, and Head Finishing
Hello, everyone. This is Enta. I wrote a series on construction errors involving ground anchors on this blog back in 2018, and I rewrote it again in 2023, but to be honest, both versions ended up feeling a bit half-baked, lol. This time, when I reread my old posts, I thought, “Wait, this…”
What Is "Over-Drilling" in Core Drilling? | Learning About Core Drilling Length from a Site Where Reinforcing Bars Couldn't Be Inserted Due to Slime
Hello, everyone. This is Enta. Someone asked me, “Why are you drilling 3.1 meters when the design calls for 3 meters?” That’s a good question. I used to wonder the same thing myself, lol. But anyway, today I’d like to talk about “over-drilling” during the drilling process. When drilling for rebar installation (rock bolt installation) or anchor installation…
Is Anti-Rust Oil for Rebar Insertion Tools Really Necessary? | Galvanized HDZT77 and the Limit of Oxidation Degradation
Hello, everyone. This is Enta. It’s been really hot every day, huh? lol The job site has been like a steam room since this morning, and it feels like my stamina’s going to wear out first. Let’s make sure to stay hydrated and get enough salt! ^^ But anyway, this time I’d like to talk about “the rust-preventive oil used in the heads of rebar insertion tools—is it really…”
The Fixed-Point Problem in Ground Anchor Tension Control | Displacement Measurement Is Difficult
Hello, everyone. This is Enta. When managing stress in ground anchors, we look at the load and the amount of elongation, right? It’s not enough to just look at the load cell and say, “Okay, that’s good.” We also check how much the prestressed steel strands have elongated and whether there are any unusual deviations from the design elongation. Basically, this is important, isn’t it? Qualification tests and…
Settlement of Ground Anchor Grout | Is Additional Grouting Necessary?
Hello, everyone. This is Enta. After installing ground anchors, it’s quite common to find that the grout has settled when you check the opening. As usual at this job site, the top of the grout was about 1 meter below the opening. There was probably some grout that had shifted downward as well…
Cost Breakdown for Ground Anchor Construction | Machinery, Consumables, and Risk Costs Based on a Case Study of 60-Meter-Class Drilling
Hello, everyone. This is Enta. It’s that muggy, hot time of year… It’s still bearable with my air-conditioned work clothes, but it’s only a matter of time before they stop being so effective!? This summer is probably going to be insanely hot again, but at the Ministry of Land, Infrastructure, Transport and Tourism, summer vacation is… I guess prefectures, cities, and towns will keep working as usual, regardless…
What Is Relaxation? | Explaining How PC Steel Strands Gradually Loosen Using Rubber Bands [Anchor Basics]
Hello, everyone. This is Enta. The other day, after I wrote an article about set loss, I got a question asking, “So, what exactly is relaxation?” lol. That’s a good question, lol. If I told you, “It’s in the Design and Construction Guidelines for Ground Anchor Works!” you’d probably be like, “Whaaaat?!” lol. At our company…
Procedures and Hazard Points for Removing Permanent and Temporary Anchors | Decision Criteria by Jack, BH, and Crane Type
Hello, everyone. This is Enta. I wrote an article a while back titled “For Those of You Who Can’t Sleep Because Your Anchor Came Loose” (what a terrible title, lol), and even now I still occasionally get messages asking, “It came loose… what should I do…?” lol I know exactly how you feel. It’s happened to me countless times too…
What Is Ground Anchor Construction? A Simple, Easy-to-Understand Explanation of Its Basic Structure and Principles
Hello, everyone. This is Enta. Do you guys attend Anchor’s technical workshops? I try to make it a point to attend these study sessions whenever possible (well, almost always, lol). The reason is simple: working underground, where you can’t see what’s going on, remains full of mysteries no matter how many years you’ve been doing it—and that’s what makes it so interesting. And then there are new techniques…



