The head-processing components for rebar insertion tools are becoming items that are easily stolen.
Hello, everyone. This is Enta. I came across a photo like this the other day. At first glance, it looked like the nut was loose, but if you look closely, there are actually two nuts there, right? lol. Did someone put it back on because it had come loose? Plus, the top nut is completely rusted, so it’s clearly not plated. &…
The Order in Which the Head Treatment Fails in Rebar Insertion Work
Hello, everyone. This is Enta. The other day, I received a really interesting and great photo on X. This is the one. It’s a photo of rebar insertion work that was done quite a while ago. I imagine that when it was first installed, the base was neatly constructed and it looked like it fit perfectly…
When preparing the ends of rebar inserts, is it better not to tighten the nuts?
Hello, everyone. This is Enta. I’m sometimes asked, “How much torque do you apply when tightening rebar inserts?” What are your thoughts on this? Basically, you just tighten them enough so they don’t come loose, but occasionally some people say you should use a specific load controlled by torque…
Visual inspections alone aren't enough when checking machinery! Be sure to check for loose bolts!
Hello, everyone. This is Enta. Thanks to the cold snap, it’s gotten much colder all of a sudden. It’s the perfect time to make good use of your electric heating vest! Let’s be sure to take full advantage of these handy gadgets! The other day, I took apart and cleaned my spring drill. The reason was that the hammer case was damaged. The bolt…
The market for new condos in Taiburu Anchor is tough! That’s exactly why you don’t need a reserve!
Hello, everyone. This is Enta. Have you ever installed SEEE tie-bar anchors? A key feature of SEEE tie-bar anchors is that their heads are designed as screws. By tightening the screw when applying tension, you can minimize the loss of initial tension as much as possible…
Is the reason torque wrench management never goes away because nuts come loose?
Hello, everyone. This is Enta. The other day, late in the afternoon, I got an email like this from a Nepalese technical intern—it had me laughing so hard lol. I’d like to teach him a thing or two about Japan next time ^^ The other day, I went to a job site where rebar was being installed using a torque wrench. It’s about time this completely…
Remove the bolts and nuts without damaging them as much as possible.
Hello, everyone. It’s Enta here. How are you spending your three-day weekend? I’m working as usual, lol. I’m guessing most of you are working as usual too? Well, there’s no point in envying others, so let’s focus on the things we can control. Anyway, moving on—this time, it’s about the revival of Neji-yama…
Accidents Involving Spray Machines | Thorough Implementation of Safety Measures
Hello, everyone. This is Enta. An unexpected accident happened. Well, I say “accident,” but no one got hurt—it was just a bit of mortar that got on me. Still, if someone had been standing right in front of me, they might have gotten hurt. So, that…
Causes of Nut Loosening and Countermeasures | Maintaining Lock Bolt Tightness
Hello, everyone. This is Enta. It’s already May! The rainy season is just around the corner! But we’re already short on spray painting crew members at this time of year, aren’t we? lol The workload starts to increase rapidly around this time, but we’re already short-handed right now… This is a problem. Thinking about balancing the workload…