Other

I Tried the Moldam Method! (Part 3) | Evaluation

2020/05/23

Hello, everyone.

This is Enta.

Continuing from last time, we’ll be discussing the Moldam method.

If you haven't been following the story so far, please check out the link below.

Shin-Ent's Slope Management Seminar
Shin-Ent's Slope Management Seminar
🕒️
For those of you who are serious about learning about slopes!
Shin-Ent's Slope Management Seminar
Shin-Ent's Slope Management Seminar
🕒️
For those of you who are serious about learning about slopes!

Moldam Method

Now that the stone wall has been restored to its former beauty, as shown last time, we’ll begin the actual bonding process.

 

But first, we'll spray on a special white liquid!

We will install a drain.

Here it is.

That completes all the prep work.

Next time, we'll finally be injecting Moldam!

 

But before that, I went there!

The company that developed the Moldam method.

To Kyushu Disaster Prevention Maintenance Co., Ltd.!

Kyushu Disaster Prevention Maintenance

We had a brief meeting, and I learned a lot by asking about various other topics as well.

Thank you very much.

 

By the way, Kyushu Disaster Prevention Maintenance Co., Ltd. has an automatic locking system, and when I stepped outside for a moment to take a phone call, I ended up getting locked out.

If you don't say something when you call, they'll shut you out lol

 

See you later.

Back
Next

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Related Articles

Distance Traveled by the Slope Worker
2026/08/13
Other

Why Do Slope Maintenance Workers Travel Such Long Distances? A Look at Annual Mileage and Vehicle Conditions

Hello, everyone. I’m Enta. I’ve been driving for about three hours, thinking to myself, “Isn’t the distance we slope workers travel just crazy?” so I figured I’d write about it lol. Our sense of distance is out of sync with the rest of the world. Generally speaking, a one-hour commute by car…

Why Do Cracks Form in Mortar?
2026/08/09
Other

Why Do Cracks Form in Mortar? | Examining the Causes of Cracks in Formwork and Sprayed Mortar from the Perspectives of Mix Design and Curing

Hello, everyone. This is Enta. I came across a job site where there were fine cracks in the joints of the retaining wall. A layperson who was with me (not a slope contractor) asked, “Is this okay?” I explained the reasons on the spot, but later I thought, “If I summarize this on my blog, people will understand…”
2026/07/30
Other

Since I needed them on the job, I built two iPhone apps myself.

Hello, this is Director Jou. I provide on-site support for civil engineering projects in Hyogo while sharing content on YouTube about the use of ICT at construction sites. This time, rather than discussing construction methods or equipment, this is more of a record of my desperate attempts. There was something I really wanted on site, but I couldn’t find it anywhere…

"The legal framework is the correct answer."
2026/07/22
Other

The Correct Way to Install Formwork Is Level (Horizontal) | Why Aligning It with the Road Grade Will Make Reinforcement Installation a Nightmare

Hello, everyone. This is Enta. When I’m driving on the highway, I can’t help but keep looking at the road embankments—it’s an occupational hazard, isn’t it? lol The other day, while I was on the road, I saw a retaining wall that sloped diagonally to match the road’s gradient. Just as I thought, “Oh, that’s to match the gradient,” I also wondered, “What if there were rebar installers working on this…”

What Is Set Loss?
2026/07/10
Other

What Is Set Loss? | How Tension Stabilization of Ground Anchors Reduces Load and On-Site Countermeasures

Hello, everyone. This is Enta. Young engineers often ask me, “Is set loss really necessary?” Come to think of it, even though the term “set loss” is thrown around all the time on job sites, there are actually a lot of people who’ve never had it properly explained to them. Back in the day, when I was installing ground anchors…