Hello, everyone.
This is Enta.
How do you level out unevenness on the back side of the pressure plate?
Since that came up, I’ll respond.
This is it lol
This is the easiest and cheapest way.
The cheapest sandbags will do just fine.
It's best to use amended soil.
If you simply fill the area with soil from the site, it may come loose or collapse due to rain, depending on the circumstances.
Please make the sandbags as reinforced as possible by adding cement.
Also, if you stack them while securing them with anchor pins and smooth out the surface, it will look great.
It’s fine to follow the same procedure whether you’re applying a spray finish or installing greenery.
In any case, it is important to install and secure the anchor pins firmly to prevent them from slipping out of place.
For areas that are in really bad shape, it’s better to apply mortar spray, but,
If you're just doing some spot repairs, sandbags are the way to go.
During construction, areas with soft soil or high groundwater levels can be addressed using sandbags filled with crushed stone.
You can get creative with this in any number of ways depending on what's inside the sandbag, so please give it a try.
See you later.
