- HOME
- List of Articles
- Cement slurry
Lowering Workability Improves Productivity | A Paradox
Hello, everyone. This is Enta. Have you ever thought about the balance between workability and quality in quality control? Let’s take cement slurry, which is commonly used. In a flow test, it typically takes 10 to 18 seconds, with a maximum of 22 seconds (for railways), right? How long does it usually take you to apply it? Well, one…
Contraindications for Using Packers in Ground Anchor Construction | Construction
Hello, everyone. This is Enta. Do you know what this is? That’s right! It’s the remains of an anchor bar from ground anchor work lol. I messed up lol. I messed up two of them at this job site. What I learned from this experience is that when drilling for grouting…
Ground Anchor Construction: Packer Injection—These Are the Absolute Musts!
Hello, everyone. This is Enta. When it comes to ground anchor construction, there are times when you might need to use a packer. If you’ve never performed construction work using a packer before, I’m going to write about the one thing you absolutely must do. Pa…
パッカーの使用方法で加圧保持の方が膨張率高い
皆さんこんにちは。 エンタです。 先日パッカーの実験を行いました。 今回のパッカーは削孔径φ135用のパッカーで、膨張径はφ149以上と言う事でした(メーカー談) 今回上記の様な感じで3種類のパッカーを用意。 パッカーは0.2…
Even if the flow test results don't fall within the specified range, it's okay as long as you repeat the test.
Hello, everyone. This is Enta. Are you measuring your flow rates? I’m sure you’ve often found that your results don’t fall within the specified range during these flow tests. Especially on hot summer days, lol. First, let’s start with the basics: What exactly is this flow rate measurement (flow test)?…
Cement slurry is carefully controlled using flow meters | Quality Control
皆さんこんにちは。 エンタです。 鉄筋挿入工やグラウンドアンカー工に置いてグラウト注入工しますよね。 その際に流量計で管理する事があると思います。 NEXCOとかは結構使用しますよね? で、あれは何かというと、字の如く流量を測っています。 …
A Great Find (I Tried Using a Test Specimen Box) | Review
Hello, everyone. This is Enta. I gave it a try!! That test specimen box!! It looks deep because I put two layers of styrofoam jigs inside, but I think it’s normally used with just one layer. There are two types available, but if you’re using it for cement slurry, you should order the φ53 one…
パッカー注入のタイミング|アンカー工
皆さんこんにちは。 エンタです。 グラウンドアンカー工において亀裂(節理)バシバシの所でセメントミルクを注入します。 と、だだ漏れでいくらミルク(セメントミルクは今後ミルク)あっても足りませんw そこで登場するのはパッカーです…
加圧注入用の加圧弁を作る|自作機材
皆さんこんにちは。 エンタです。 久々に加圧弁を作りました。 材料だけ注文しておき現場から帰ったら溶接して組み立てます。 ある程度ピッタリでレーザーで切り出ししているので組むのも簡単。 1incのニップルを半分に切って注入口とプレッシャーゲ…



