Methods for Lifting a Drilling Rig onto a Slope (Part 3)
Hello, everyone. This is Enta. How to Hoist a Drilling Rig onto a Slope (Part 1) How to Hoist a Drilling Rig onto a Slope (Part 2) In my previous post, I wrote about how to transport machinery using a cableway (log hauler). This time, I’ll discuss how to transport heavy loads at sites that use such cableways…
Methods for Lifting a Drilling Rig onto a Slope (Part 2)
Hello, everyone. This is Enta. How to Lift a Drilling Rig onto a Slope (Part 1) This is Part 2 of the series on lifting machinery onto slopes. Last time, we covered the mobile crane, which is commonly used. This time, we’ll look at cableways. I actually wrote a similar article before, lol. Log Loaders and Cableways …
Methods for Hoisting a Drilling Rig onto a Slope (Part 1)
Hello, everyone. This is Enta. How do you go about moving machinery? In this case, I’m referring to situations like setting up machinery from ground level up onto a slope. For example, the method used to transport machinery from ground level (where the vehicle is parked) to the scaffolding at the top of a slope in order to perform ground anchor work…
Let's take lots of selfies and photos of our friends on site!
皆さんこんにちは エンタです。 先日こんな写真を撮ったんです。 暇だったために、日の目を見ることがなかった新車のポンプや発電機がやっと！！ って思って写真撮ったんですｗ この写真が2022年10月4日です。 そして、この写真見…
Will the ”Invoice System” Cause Major Chaos in the Construction Industry? With Only “Half a Year” Left Before the Deadline, Will Preparations and Discussions Be Completed in Time? (From “The God of Construction”)
What Will Change Under the Invoice System? The “Invoice System (Qualified Invoice Retention System),” which takes effect on October 1, 2023, is expected to have a significant impact on the construction industry, particularly on sole proprietors. The Invoice System was introduced due to the implementation of multiple consumption tax rates—8% and 10%—…
I'll keep an eye on what happens next
皆さんこんにちは。 エンタです。 先日引越で腰をやりましたｗ まぁしょうがないんですけども。。。 引越は鹿児島の母親を愛知に引き取りました。(イイ年齢なので) コレで私が鹿児島に帰る理由は、鹿児島の法面屋に会いに行く事くらい？…
The Correct Way to Wire on Site | Connection Procedures and Precautions to Avoid Mistakes on Site
Hello, everyone. This is Enta. It really is a wonderful time of year! The other day, I let my guard down a bit and ended up with a runny nose... But after getting plenty of rest, I’m feeling completely back to normal, and starting today, it’s the Construction Technology Fair 2022 in Chubu! I plan to go on the second day, the 5th. Of course, I’ll be “covering” the products I want to show you all!…
A Note on Inner Bits
Hello, everyone. This is Enta. Today, I’m going to talk about bits, lol. “Inner bits” are the bits used for drilling holes in the double-walled tubes of rotary percussion instruments. Since the “outer” bit is on the outside and the “inner” bit is on the inside, there are various types of inner bits as well. Everyone…
The Purpose of a Zabuton Frame | Leveling and Transmitting Anchor Force to the Subgrade
Hello, everyone. It’s Enta here. It’s gradually getting colder, but then it gets hot again lol. Are you all taking good care of yourselves? Let’s get plenty of sleep and stay in good shape! But anyway… You know what this is, right? That’s right! It’s the zabuton frame. So, about this zabuton frame…