Countermeasures for Over-Drilling During Ground Anchor Drilling
Hello, everyone. This is Enta. When it comes to ground anchor work, have you ever drilled too deep? It happens sometimes—like when you accidentally drill too deep, right? lol (Or maybe not that often?) There are times when you just have to drill deeper because of the remaining length of the casing…
High-Pressure Drilling (Part 1)
Hello, everyone. This is Enta. Do you know this bit? This bit is used at sites with high water pressure and is called a Kronen bit. When the pressure is high, water gushes out during drilling. For example, even after completing a 10-meter borehole, the internal pressure…
I'm thinking this might be the easiest-to-use backing material for pressure plates.
Hello, everyone. This is Enta. What’s your favorite method for leveling the backfill under a load-bearing slab? lol I know it sounds a little weird to say I “like” it, but what I mean is—which method offers the best workability and is the most cost-effective? The standard method for leveling is the zabuton frame, right? Other than that…
Using a Slime Head prevents the slime from splattering.
Hello, everyone. It’s Enta here. Thankfully, I’ve been really busy this year ^^ Thanks to all of you, I’ve been able to keep things going. I still have openings for next year!!! Please feel free to book me lol. Anyway, how do you usually deal with Drill Slimes? In my case, I go straight to my friends…
We've discovered a ground anchor method that can reduce carbon dioxide emissions! (Innovation)
Hello, everyone. This is Enta. Have you seen this before? It’s a load-bearing element. A temporary wooden anchor load-bearing element. It’s amazing, isn’t it! I thought, “It’ll rot away after installation!?” but since it’s actually covered in cement slurry, that won’t happen, lol …
Where Is the Construction Error in the Ground Anchor Work? (Part 4)
Hello, everyone. This is Enta. I’ve been meeting with my blog readers quite often lately, and I’m really happy about that. Even though I feel a bit of pressure knowing you’re looking forward to it (lol), talking about slope stabilization is a lot of fun ^^ I’ll continue to share useful on-site tips with you all as much as I can…
Where Is the Construction Error in the Ground Anchor Work? (Part 3)
Hello, everyone. This is Enta. Wow, there’s hardly anyone here, huh? lol I’m so swamped I can’t even move a muscle! Still, I’ll do my absolute best within my capabilities! I’m really hoping everyone involved will let us extend the schedule a bit, lol. Anyway, moving on to Point 4: Tension Work. A construction error in tension management…
Where Is the Construction Error in the Ground Anchor Work? (Part 2)
Hello, everyone. This is Enta. I was in the Kanto region starting last Thursday. I went to a job site run by one of our group companies to inspect the site and decide on various directions moving forward. It was a tough site that would be a real challenge unless we tweaked our approach a bit, so I went to check it out (lol). With difficult sites like this, getting off to the right start is crucial…
Where is the mistake in the ground anchor installation?
Hello, everyone. This is Enta. It seems to be getting a little cold again, doesn't it...? The seasons are all over the place here in Japan! lol By the way, would you like to work at Enta? I'm serious! I really mean it!! We do get some prank emails asking, "Are you hiring?" though...