Hello, everyone.
This is Enta.
It's summer!
Finally!!!
The long spell of rain is finally over!
Starting now, we're in for about two months of scorching heat.
Let's all be very careful as we go about our work!
But that's beside the point.
I made that thing I mentioned the other day.
It's that thing you use to collect slime.
This is it!
The mesh is 5 mm, which is a bit on the large side. (For experimental purposes)
Since this photo was taken from the side, the mesh would normally face downward during drilling.
There's a mesh screen on top as well, but it's a spare.
Normally, use it with the net removed, and attach the net when collecting slime.
Once you set it up, slime will start to accumulate in the mesh section.
Even if slime builds up and you leave it alone, it'll be flushed out through the hole in the front, so it shouldn't get clogged! lol
The net also has a locking mechanism, so it won't come off.
That said, it’s still in the experimental stage, so I’m not sure how it will turn out, but since the hole in the front is at least as wide as a 2-inch hose, I think it should be fine.
Work on a site with four temporary anchors starts this week, so I'm going to give it a try lol
I worked really hard to get these four temporary tracks ready, so I really want to make this a success, lol.
I created this to make construction management a little easier, so I’d like to make it a product I can recommend.
Please wait just a little longer. I hope to show you a video next time.
See you later.
