Hello, everyone.
This is Enta.
The other day, I was repairing a high-head submersible pump.
It's not working quite right, so I'm taking it apart to fix it.
Unless it's the motor inside, it's usually damage to the suction impeller (fan) at the bottom, or
It's almost certainly a broken Captia cable.
After all, with submersible pumps, you often have to use a cable to lower them into the water or pull them back up, right?
This can cause the wire to break near the base.
If the pump isn't submerged in water and has seized up, you'll have to replace the internal parts lol
That can't be helped, but in most cases, please check for a broken wire.
For now, please check the power outlet and the base of the device.
However, there are cases where simply checking for voltage with a tester isn't enough to determine this (because continuity may or may not be present depending on the shape of the capacitor).
You should try connecting it to a normal tire to see how it works.
See you later.
P.S.: Starting tomorrow, I'll be on a business trip to Tokyo (the mountains, lol) and Yokohama.
I'll be away for about three days conducting an investigation.
Also, please let us know as soon as possible if the Slope Maintenance Team has any requests.
