Methods and Principles for Measuring Drill Hole Length
Hello, everyone. This is Enta. Since quite a few people seem confused about the concept of drilling length, I’d like to explain it. Let’s start with the basics. Drilling length refers to the length of the drilled hole. So why is measuring drilling length so confusing? It’s because of the remaining length…
Tips for Measuring Drill Hole Length | On-Site Techniques
Hello, everyone. This is Enta. When measuring the drilling depth during drilling, you usually hold the pin pole in one hand and use a staff and tape measure to take measurements, right? I think it’s pretty difficult because the measurements tend to be off. So, please try doing it as shown in the photo. You can probably see that the pin pole is floating, but…
Methods and Principles for Measuring Drill Hole Length | On-Site Quality Control
Hello, everyone. This is Enta. Since quite a few people seem confused about the concept of drilling length, I’d like to explain it. Let’s start with the basics. Drilling length refers to the length of the drilled hole. So why is measuring drilling length so confusing? It’s because of the remaining length…
Inspection of Self-Drilling Rock Bolts | Collaboration with "The God of Construction"
Hello, everyone. This is Enta. Starting this week, we’ll be sharing articles with a website called “The God of Construction.” A few of these articles will be posted each month. The site is a major platform, and I’ve heard it attracts a lot of traffic from people at major general contractors, so this is a chance to raise awareness about slope stabilization work…