![\"Wash](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2018\/04\/tearai_boy.png\")
<\/p>\nHello, everyone.<\/p>\n
This is Enta.<\/p>\n
Although it's a national holiday, we are open as usual.<\/p>\n
If you have time off, please enjoy Golden Week and stay safe!<\/p>\n
But that's beside the point.<\/p>\n
What do you do when your hands get dirty on the job?<\/p>\n
Well, normally, most people probably have soap or some other cleaning product on hand, but let's say you don't.<\/p>\n
It's really hard to get grease off when it gets on you at the job site, isn't it?<\/p>\n
But there\u2019s definitely something right there on the spot that can remove it completely.<\/p>\n
<\/p>\n
Could you kind of picture it? lol<\/p>\n
<\/p>\n
Here's the answer.<\/p>\n
The answer is\u7802<\/span><\/strong><\/span>That's it.<\/p>\n You can use sand intended for spraying, or just regular sand from around here will do just fine.<\/p>\n Gently squeeze it and try rubbing your hands together lightly with some water.<\/p>\n It should be easy to remove. The finer the texture, the better it comes off.<\/p>\n The ones that work best are the ones with fine, clay-like particles.<\/p>\n <\/p>\n Actually, rather than washing it away, it works by absorbing it and removing it.<\/p>\n It's trapping dirt on the sand particles.<\/p>\n What's more, if you scrub it vigorously, it acts as a substitute for polishing compound and removes the surface layer.<\/p>\n You have to be very careful, because doing this too much can cause your hands to become chapped.<\/p>\n That's a handy tip for the job site, isn't it?<\/p>\n It\u2019s better than not knowing, so I hope to keep sharing tips like this.<\/p>\n <\/p>\n See you later.<\/p>\n Concrete Loses Strength as It Dries | JIS A1108<\/a><\/p><\/blockquote>\n![\"Wisdom\"](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2018\/04\/20.png\")
<\/p>\n