![\"Framework](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2024\/01\/2024-01-19-09.50.18-2.jpg\")
<\/p>\nHello, everyone.<\/p>\n
This is Enta.<\/p>\n
You're a structural steelworker, right?<\/p>\n
<\/p>\n
Do you know how to calculate the vegetation works and sprayed mortar within the frame?<\/p>\n
<\/p>\n
The reason I\u2019m saying this is that I once saw a consultant at a certain project site who was doing something truly amazing with the method for calculating values within a given framework.<\/p>\n
![\"Installation](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2024\/01\/4cb9d6e94aea908c62e7edfbe6163ddd.jpg\")
<\/p>\n
In CAD, I measure the height and width of each individual frame, calculate the area of each one, and then add them all up.<\/p>\n
<\/p>\n
For example, for a standard \u25a1300 frame with a pitch of 2,000 mm,<\/p>\n
The frame is 1700 \u00d7 1700, right?<\/p>\n
![\"Legal](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2024\/04\/7a3a545c57dfd3ffa3846d6235e6a031.jpg\")
<\/p>\n
1.7 \u00d7 1.7 = 2.89 m\u00b2<\/p>\n
I measured each section of the entire frame one by one to calculate the area.<\/p>\n
Of course, there are triangular and diamond-shaped sections too, so since I have to measure each one individually, it takes an absurd amount of time.<\/p>\n
<\/p>\n
Depending on the area, are consultants really doing this for real?<\/p>\n
That's what I've come to think.<\/p>\n
<\/p>\n
So, in this post, I'll show you how to display the quantity within a box ^^<\/p>\n
This method makes it very easy, so please give it a try.<\/p>\n
----------------------------------------<\/p>\n
The total area can be calculated using the area conversion table.<\/p>\n
![\"Legal](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2022\/02\/2c567a8887524eaf4dfeae216dfc1114.jpg\")
<\/p>\n
You'd create a flat pattern like this, right?<\/p>\n
Set the legal margin to \u25a1300.<\/p>\n
<\/p>\n
Let's assume this area is 1,000 m\u00b2.<\/p>\n
Let's assume the total length of the legal framework is 1,000 meters.<\/p>\n
Area \u2013 (Total length of the legal boundaries \u00d7 0.3 m) = 1,000 m\u00b2 \u2013 300 m\u00b2 = 700 m\u00b2<\/span><\/strong><\/span><\/p>\n This is the easiest way, isn't it?<\/p>\n <\/p>\n However, this is how things are done on the ground.<\/p>\n I think this is the best way to make the final changes.<\/p>\n Well, some people do use it for design\u2014actually, that might be the majority, lol.<\/p>\n <\/p>\n An even simpler method is to use the figures per 1,000 m\u00b2\u2014that makes the calculations much easier.<\/p>\n From the Free Frame Association<\/p>\n <\/p>\n If you use the area of the site, you can calculate the quantities right away by comparison, right?<\/p>\n Since the approximate value per square meter for the frame length is provided, you can easily calculate the dimensions within the frame using this value.<\/p>\n <\/p>\n It would really help us out on site a lot if they could just make it easier to get things out, you know?<\/p>\n Rather than trying to do some complicated calculations, I'll just use the association's data.<\/p>\n This is the easiest and fastest way, isn't it?<\/p>\n Just for your reference ^^<\/p>\n <\/p>\n See you later.<\/p>","protected":false},"excerpt":{"rendered":" Hello, everyone. This is Enta. You\u2019re working on formwork construction, right? Do you know how to calculate the vegetation work and mortar spraying inside the formwork? The reason I\u2019m bringing this up is that at a certain job site, there was a consultant doing something really unusual when it came to calculating the formwork dimensions. CAD\u2026<\/p>","protected":false},"author":2,"featured_media":51254,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[29,40],"tags":[61,290,1220,3988,4465,6195,6196],"class_list":["post-51252","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-frame-spraying","category-as-built","tag-61","tag-290","tag-1220","tag-3988","tag-4465","tag-6195","tag-m2"],"acf":[],"yoast_head":"\n\n\n
\n Legal Frame Size<\/td>\n Vertical Pitch (m)<\/td>\n Lateral Pitch (m)<\/td>\n Overall Length (m)<\/td>\n<\/tr>\n \n 150<\/td>\n 1.15<\/td>\n 1.50<\/td>\n 1503<\/td>\n<\/tr>\n \n 150<\/td>\n 1.15<\/td>\n 1.15<\/td>\n 1678<\/td>\n<\/tr>\n \n 200<\/td>\n 1.20<\/td>\n 1.50<\/td>\n 1438<\/td>\n<\/tr>\n \n 200<\/td>\n 1.20<\/td>\n 1.20<\/td>\n 1575<\/td>\n<\/tr>\n \n 300<\/td>\n 2.00<\/td>\n 2.00<\/td>\n 975<\/td>\n<\/tr>\n \n 300<\/td>\n 2.00<\/td>\n 2.00<\/td>\n 975<\/td>\n<\/tr>\n \n 300<\/td>\n 2.00<\/td>\n 2.00<\/td>\n 975<\/td>\n<\/tr>\n \n 400<\/td>\n 2.00<\/td>\n 2.00<\/td>\n 944<\/td>\n<\/tr>\n \n 400<\/td>\n 2.00<\/td>\n 2.00<\/td>\n 944<\/td>\n<\/tr>\n \n 400<\/td>\n 2.50<\/td>\n 2.50<\/td>\n 784<\/td>\n<\/tr>\n \n 500<\/td>\n 2.50<\/td>\n 2.50<\/td>\n 764<\/td>\n<\/tr>\n \n 500<\/td>\n 3.00<\/td>\n 3.00<\/td>\n 657<\/td>\n<\/tr>\n \n 600<\/td>\n 3.00<\/td>\n 3.00<\/td>\n 642<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n