Cutting Steel! (Special Edition)<\/a><\/p>\nSince it was time to replace the metal-cutting bit, I compared it to a brand-new one.<\/p>\n
As expected, the main unit isn't worn down at all.<\/p>\n
<\/p>\n
It will probably still work for a while as is, but it will definitely slow down.<\/p>\n
With this older model, it takes about 40 minutes to cut one piece.<\/p>\n
However, since a brand-new one lasts about 15 minutes or more, the cutting performance is completely different.<\/p>\n
<\/p>\n
Every time I drill a hole, the chips fly off, so the blade loses its sharpness.<\/p>\n
![\"Steel-Cutting](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/07\/2021-07-20-08.38.15.jpg\")
<\/p>\n
There's actually more tungsten (chips) left than I expected, so it looks like I can use it for thin plates.<\/p>\n
It's such an expensive item, so it's a waste, isn't it? lol<\/p>\n
I don't need all of them, but if I could keep a few in case I might need them someday in the future...<\/p>\n
By the way, the design specifies a replacement frequency of 2.5 units.<\/p>\n
<\/p>\n
By the way, did you know that tomorrow is a national holiday?<\/p>\n
I found out the other day and was totally surprised lol<\/p>\n
<\/p>\n
It's hot again today, but let's do our best while taking breaks and not pushing ourselves too hard!<\/p>\n
<\/p>\n
See you later.<\/p>","protected":false},"excerpt":{"rendered":"
Hello, everyone. It\u2019s Enta here. The only word that comes to mind right now is \u201chot\u201d! lol It\u2019s really hot, isn\u2019t it? lol As I\u2019ve mentioned before, here are my posts on metal-cutting bits: \u201cCutting Metal! (Part 1),\u201d \u201cCutting Metal (Part 2),\u201d \u201cCutting Metal (Part 3),\u201d and \u201cCutting Metal! (Bonus Edition).\u201d It just so happened that it was time to replace my metal-cutting bits\u2026<\/p>","protected":false},"author":2,"featured_media":43884,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_total_topic_count_hidden":0,"_bbp_total_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[28],"tags":[48,3503,4634],"class_list":["post-44865","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-ground-anchor","tag-48","tag-3503","tag-4634"],"acf":[],"yoast_head":"\n
\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\uff5c\u6d88\u8017\u54c1 - \u65b0\u30a8\u30f3\u30bf\u306e\u6cd5\u9762\u7ba1\u7406\u587e<\/title>\n<meta name=\"description\" content=\"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\u3092\u6bd4\u8f03\u3059\u308b\u6d88\u8017\u54c1\u30ec\u30dd\u30fc\u30c8\u3002\u65b0\u54c1\u3068\u53e4\u3044\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u5207\u65ad\u6642\u9593\u5dee\u3092\u6cd5\u9762\u5c4b\u304c\u5b9f\u6e2c\u3057\u3001\u30d3\u30c3\u30c8\u4ea4\u63db\u6642\u671f\u306e\u5224\u65ad\u57fa\u6e96\u3068\u3001\u672c\u4f53\u306f\u524a\u308c\u306a\u3044\u304c\u5207\u65ad\u901f\u5ea6\u304c\u843d\u3061\u308b\u4ed5\u7d44\u307f\u3092\u7d4c\u55b6\u8005\u76ee\u7dda\u3067\u89e3\u8aac\u3057\u307e\u3059\u3002\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/norimen.net\/en\/iron-cut-before-and-after\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\uff5c\u6d88\u8017\u54c1\" \/>\n<meta property=\"og:description\" content=\"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\u3092\u6bd4\u8f03\u3059\u308b\u6d88\u8017\u54c1\u30ec\u30dd\u30fc\u30c8\u3002\u65b0\u54c1\u3068\u53e4\u3044\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u5207\u65ad\u6642\u9593\u5dee\u3092\u6cd5\u9762\u5c4b\u304c\u5b9f\u6e2c\u3057\u3001\u30d3\u30c3\u30c8\u4ea4\u63db\u6642\u671f\u306e\u5224\u65ad\u57fa\u6e96\u3068\u3001\u672c\u4f53\u306f\u524a\u308c\u306a\u3044\u304c\u5207\u65ad\u901f\u5ea6\u304c\u843d\u3061\u308b\u4ed5\u7d44\u307f\u3092\u7d4c\u55b6\u8005\u76ee\u7dda\u3067\u89e3\u8aac\u3057\u307e\u3059\u3002\" \/>\n<meta property=\"og:url\" content=\"https:\/\/norimen.net\/en\/iron-cut-before-and-after\/\" \/>\n<meta property=\"og:site_name\" content=\"\u65b0\u30a8\u30f3\u30bf\u306e\u6cd5\u9762\u7ba1\u7406\u587e\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/norimenman\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/norimenman\/\" \/>\n<meta property=\"article:published_time\" content=\"2021-07-20T23:00:04+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-17T02:51:55+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/03\/2019-11-13-14.52.44.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"600\" \/>\n\t<meta property=\"og:image:height\" content=\"450\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"\u30a8\u30f3\u30bf\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@norimenman\" \/>\n<meta name=\"twitter:site\" content=\"@norimenman\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"\u30a8\u30f3\u30bf\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/\"},\"author\":{\"name\":\"\u30a8\u30f3\u30bf\",\"@id\":\"https:\\\/\\\/norimen.net\\\/#\\\/schema\\\/person\\\/7e507d48b040ed0f7a88ef4625070b95\"},\"headline\":\"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\uff5c\u6d88\u8017\u54c1\",\"datePublished\":\"2021-07-20T23:00:04+00:00\",\"dateModified\":\"2026-05-17T02:51:55+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/\"},\"wordCount\":5,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/norimen.net\\\/wordpress\\\/wp-content\\\/uploads\\\/2021\\\/03\\\/2019-11-13-14.52.44.jpg\",\"keywords\":[\"\u30b0\u30e9\u30a6\u30f3\u30c9\u30a2\u30f3\u30ab\u30fc\u5de5\",\"\u9244\u5207\u308a\u30d3\u30c3\u30c8\",\"\u30d3\u30d5\u30a9\u30fc\u30a2\u30d5\u30bf\u30fc\"],\"articleSection\":[\"\u30b0\u30e9\u30a6\u30f3\u30c9\u30a2\u30f3\u30ab\u30fc\u5de5\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/\",\"url\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/\",\"name\":\"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\uff5c\u6d88\u8017\u54c1 - \u65b0\u30a8\u30f3\u30bf\u306e\u6cd5\u9762\u7ba1\u7406\u587e\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/norimen.net\\\/wordpress\\\/wp-content\\\/uploads\\\/2021\\\/03\\\/2019-11-13-14.52.44.jpg\",\"datePublished\":\"2021-07-20T23:00:04+00:00\",\"dateModified\":\"2026-05-17T02:51:55+00:00\",\"description\":\"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\u3092\u6bd4\u8f03\u3059\u308b\u6d88\u8017\u54c1\u30ec\u30dd\u30fc\u30c8\u3002\u65b0\u54c1\u3068\u53e4\u3044\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u5207\u65ad\u6642\u9593\u5dee\u3092\u6cd5\u9762\u5c4b\u304c\u5b9f\u6e2c\u3057\u3001\u30d3\u30c3\u30c8\u4ea4\u63db\u6642\u671f\u306e\u5224\u65ad\u57fa\u6e96\u3068\u3001\u672c\u4f53\u306f\u524a\u308c\u306a\u3044\u304c\u5207\u65ad\u901f\u5ea6\u304c\u843d\u3061\u308b\u4ed5\u7d44\u307f\u3092\u7d4c\u55b6\u8005\u76ee\u7dda\u3067\u89e3\u8aac\u3057\u307e\u3059\u3002\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#primaryimage\",\"url\":\"https:\\\/\\\/norimen.net\\\/wordpress\\\/wp-content\\\/uploads\\\/2021\\\/03\\\/2019-11-13-14.52.44.jpg\",\"contentUrl\":\"https:\\\/\\\/norimen.net\\\/wordpress\\\/wp-content\\\/uploads\\\/2021\\\/03\\\/2019-11-13-14.52.44.jpg\",\"width\":600,\"height\":450,\"caption\":\"\u30ea\u30f3\u30b0\u30d3\u30c3\u30c8\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u30db\u30fc\u30e0\",\"item\":\"https:\\\/\\\/norimen.net\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\uff5c\u6d88\u8017\u54c1\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/norimen.net\\\/#website\",\"url\":\"https:\\\/\\\/norimen.net\\\/\",\"name\":\"\u65b0\u30a8\u30f3\u30bf\u306e\u6cd5\u9762\u7ba1\u7406\u587e\",\"description\":\"\u6cd5\u9762\u306e\u4e8b\u3092\u672c\u6c17\u3067\u77e5\u308a\u305f\u3044\u3042\u306a\u305f\u3078\uff01\",\"publisher\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/#organization\"},\"alternateName\":\"\u30a8\u30f3\u30bf\u306e\u30ce\u30ea\u30e1\u30f3\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/norimen.net\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":[\"Organization\",\"Place\"],\"@id\":\"https:\\\/\\\/norimen.net\\\/#organization\",\"name\":\"\u65b0\u30a8\u30f3\u30bf\u306e\u6cd5\u9762\u7ba1\u7406\u587e\",\"alternateName\":\"\u5869\u7530\u958b\u767a\u682a\u5f0f\u4f1a\u793e\",\"url\":\"https:\\\/\\\/norimen.net\\\/\",\"logo\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#local-main-organization-logo\"},\"image\":{\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#local-main-organization-logo\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/norimenman\",\"https:\\\/\\\/x.com\\\/norimenman\",\"https:\\\/\\\/www.instagram.com\\\/enta.d\"],\"telephone\":[],\"openingHoursSpecification\":[{\"@type\":\"OpeningHoursSpecification\",\"dayOfWeek\":[\"Monday\",\"Tuesday\",\"Wednesday\",\"Thursday\",\"Friday\",\"Saturday\",\"Sunday\"],\"opens\":\"09:00\",\"closes\":\"17:00\"}]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/norimen.net\\\/#\\\/schema\\\/person\\\/7e507d48b040ed0f7a88ef4625070b95\",\"name\":\"\u30a8\u30f3\u30bf\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/7b9657262458e754e6e51a10396868dafe6afa60d649dffcd4d52a5fc01aaa7d?s=96&d=monsterid&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/7b9657262458e754e6e51a10396868dafe6afa60d649dffcd4d52a5fc01aaa7d?s=96&d=monsterid&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/7b9657262458e754e6e51a10396868dafe6afa60d649dffcd4d52a5fc01aaa7d?s=96&d=monsterid&r=g\",\"caption\":\"\u30a8\u30f3\u30bf\"},\"description\":\"\u5927\u624b\u6cd5\u9762\u5c02\u9580\u5efa\u8a2d\u4f1a\u793e\u306b\u5c31\u8077\u5f8c\u300132\u6b73\u3067\u72ec\u7acb\u3002 \u3042\u307e\u308a\u306e\u6687\u3055\u306b\u30d6\u30ed\u30b0\u3092\u958b\u8a2d\u3002\u6cd5\u9762\u306e\u30ce\u30a6\u30cf\u30a6\u3092\u516c\u958b\u3057\u3001\u3042\u308a\u3068\u3042\u3089\u3086\u308b\u8cea\u554f\u306b\u7b54\u3048\u3066\u304d\u307e\u3057\u305f\u3002 \u305d\u306e\u7d50\u679c\u3001\u6cd5\u9762\u696d\u8005\u3001\u5143\u8acb\u696d\u8005\u3001\u305d\u306e\u4ed6\u30bc\u30cd\u30b3\u30f3\u304b\u3089\u306e\u554f\u3044\u5408\u308f\u305b\u3001\u8cea\u554f\u3001\u53d7\u6ce8\u304c\u5897\u3048\u3066\u304d\u307e\u3057\u305f\u3002 \u30a2\u30e1\u30d6\u30ed\u3067\u306f\u30bd\u30b3\u30bd\u30b3\u95b2\u89a7\u304c\u5897\u3048\u3001 \u305d\u3053\u3067\u72ec\u81ea\u30c9\u30e1\u30a4\u30f3\u3092\u53d6\u5f97\u3057\u5c11\u3057\u3067\u3082\u5feb\u9069\u306a\u30d6\u30ed\u30b0\u3092\u76ee\u5dee\u3059\u3079\u304f\u3001\u30a2\u30e1\u30d6\u30ed\u304b\u3089\u306e\u5352\u696d\u3092\u6c7a\u3081\u307e\u3057\u305f\u3002 \u4eca\u5f8c\u3082\u3053\u3061\u3089\u3067\u5305\u307f\u96a0\u3055\u305a\u5168\u3066\u306e\u30ce\u30a6\u30cf\u30a6\u3092\u516c\u958b\u3057\u3066\u3044\u3053\u3046\u3068\u601d\u3063\u3066\u3044\u307e\u3059\u3002 \u4eca\u5f8c\u3068\u3082\u3088\u308d\u3057\u304f\u304a\u9858\u3044\u7533\u3057\u4e0a\u3052\u307e\u3059\u3002\",\"sameAs\":[\"http:\\\/\\\/enta-d.co.jp\\\/\",\"https:\\\/\\\/www.facebook.com\\\/norimenman\\\/\",\"https:\\\/\\\/www.instagram.com\\\/enta.d\\\/\",\"https:\\\/\\\/x.com\\\/norimenman\",\"https:\\\/\\\/www.youtube.com\\\/c\\\/entadnorimenman\"]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/norimen.net\\\/iron-cut-bit-before-after\\\/#local-main-organization-logo\",\"url\":\"https:\\\/\\\/norimen.net\\\/wordpress\\\/wp-content\\\/uploads\\\/2016\\\/10\\\/site_title_logo.png\",\"contentUrl\":\"https:\\\/\\\/norimen.net\\\/wordpress\\\/wp-content\\\/uploads\\\/2016\\\/10\\\/site_title_logo.png\",\"width\":220,\"height\":50,\"caption\":\"\u65b0\u30a8\u30f3\u30bf\u306e\u6cd5\u9762\u7ba1\u7406\u587e\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Before and After Using a Metal-Cutting Bit | Consumables - Shin-Ent's Slope Management School","description":"A consumables report comparing steel-cutting bits before and after use. A slope contractor measures the difference in cutting time between new and worn steel-cutting bits and, from a business owner\u2019s perspective, explains the criteria for determining when to replace the bits, as well as the mechanism by which cutting speed decreases even though the main body of the machine isn\u2019t worn down.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/norimen.net\/en\/iron-cut-before-and-after\/","og_locale":"en_US","og_type":"article","og_title":"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\uff5c\u6d88\u8017\u54c1","og_description":"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\u3092\u6bd4\u8f03\u3059\u308b\u6d88\u8017\u54c1\u30ec\u30dd\u30fc\u30c8\u3002\u65b0\u54c1\u3068\u53e4\u3044\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u5207\u65ad\u6642\u9593\u5dee\u3092\u6cd5\u9762\u5c4b\u304c\u5b9f\u6e2c\u3057\u3001\u30d3\u30c3\u30c8\u4ea4\u63db\u6642\u671f\u306e\u5224\u65ad\u57fa\u6e96\u3068\u3001\u672c\u4f53\u306f\u524a\u308c\u306a\u3044\u304c\u5207\u65ad\u901f\u5ea6\u304c\u843d\u3061\u308b\u4ed5\u7d44\u307f\u3092\u7d4c\u55b6\u8005\u76ee\u7dda\u3067\u89e3\u8aac\u3057\u307e\u3059\u3002","og_url":"https:\/\/norimen.net\/en\/iron-cut-before-and-after\/","og_site_name":"\u65b0\u30a8\u30f3\u30bf\u306e\u6cd5\u9762\u7ba1\u7406\u587e","article_publisher":"https:\/\/www.facebook.com\/norimenman","article_author":"https:\/\/www.facebook.com\/norimenman\/","article_published_time":"2021-07-20T23:00:04+00:00","article_modified_time":"2026-05-17T02:51:55+00:00","og_image":[{"width":600,"height":450,"url":"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/03\/2019-11-13-14.52.44.jpg","type":"image\/jpeg"}],"author":"\u30a8\u30f3\u30bf","twitter_card":"summary_large_image","twitter_creator":"@norimenman","twitter_site":"@norimenman","twitter_misc":{"Written by":"\u30a8\u30f3\u30bf"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#article","isPartOf":{"@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/"},"author":{"name":"\u30a8\u30f3\u30bf","@id":"https:\/\/norimen.net\/#\/schema\/person\/7e507d48b040ed0f7a88ef4625070b95"},"headline":"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\uff5c\u6d88\u8017\u54c1","datePublished":"2021-07-20T23:00:04+00:00","dateModified":"2026-05-17T02:51:55+00:00","mainEntityOfPage":{"@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/"},"wordCount":5,"commentCount":0,"publisher":{"@id":"https:\/\/norimen.net\/#organization"},"image":{"@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#primaryimage"},"thumbnailUrl":"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/03\/2019-11-13-14.52.44.jpg","keywords":["\u30b0\u30e9\u30a6\u30f3\u30c9\u30a2\u30f3\u30ab\u30fc\u5de5","\u9244\u5207\u308a\u30d3\u30c3\u30c8","\u30d3\u30d5\u30a9\u30fc\u30a2\u30d5\u30bf\u30fc"],"articleSection":["\u30b0\u30e9\u30a6\u30f3\u30c9\u30a2\u30f3\u30ab\u30fc\u5de5"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/norimen.net\/iron-cut-bit-before-after\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/","url":"https:\/\/norimen.net\/iron-cut-bit-before-after\/","name":"Before and After Using a Metal-Cutting Bit | Consumables - Shin-Ent's Slope Management School","isPartOf":{"@id":"https:\/\/norimen.net\/#website"},"primaryImageOfPage":{"@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#primaryimage"},"image":{"@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#primaryimage"},"thumbnailUrl":"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/03\/2019-11-13-14.52.44.jpg","datePublished":"2021-07-20T23:00:04+00:00","dateModified":"2026-05-17T02:51:55+00:00","description":"A consumables report comparing steel-cutting bits before and after use. A slope contractor measures the difference in cutting time between new and worn steel-cutting bits and, from a business owner\u2019s perspective, explains the criteria for determining when to replace the bits, as well as the mechanism by which cutting speed decreases even though the main body of the machine isn\u2019t worn down.","breadcrumb":{"@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/norimen.net\/iron-cut-bit-before-after\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#primaryimage","url":"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/03\/2019-11-13-14.52.44.jpg","contentUrl":"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/03\/2019-11-13-14.52.44.jpg","width":600,"height":450,"caption":"\u30ea\u30f3\u30b0\u30d3\u30c3\u30c8"},{"@type":"BreadcrumbList","@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u30db\u30fc\u30e0","item":"https:\/\/norimen.net\/"},{"@type":"ListItem","position":2,"name":"\u9244\u5207\u308a\u30d3\u30c3\u30c8\u306e\u4f7f\u7528\u524d\u3068\u4f7f\u7528\u5f8c\uff5c\u6d88\u8017\u54c1"}]},{"@type":"WebSite","@id":"https:\/\/norimen.net\/#website","url":"https:\/\/norimen.net\/","name":"Shin-Ent's Slope Management Seminar","description":"For those of you who are serious about learning about slopes!","publisher":{"@id":"https:\/\/norimen.net\/#organization"},"alternateName":"\u30a8\u30f3\u30bf\u306e\u30ce\u30ea\u30e1\u30f3","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/norimen.net\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":["Organization","Place"],"@id":"https:\/\/norimen.net\/#organization","name":"Shin-Ent's Slope Management Seminar","alternateName":"\u5869\u7530\u958b\u767a\u682a\u5f0f\u4f1a\u793e","url":"https:\/\/norimen.net\/","logo":{"@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#local-main-organization-logo"},"image":{"@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#local-main-organization-logo"},"sameAs":["https:\/\/www.facebook.com\/norimenman","https:\/\/x.com\/norimenman","https:\/\/www.instagram.com\/enta.d"],"telephone":[],"openingHoursSpecification":[{"@type":"OpeningHoursSpecification","dayOfWeek":["Monday","Tuesday","Wednesday","Thursday","Friday","Saturday","Sunday"],"opens":"09:00","closes":"17:00"}]},{"@type":"Person","@id":"https:\/\/norimen.net\/#\/schema\/person\/7e507d48b040ed0f7a88ef4625070b95","name":"Entertainment","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/7b9657262458e754e6e51a10396868dafe6afa60d649dffcd4d52a5fc01aaa7d?s=96&d=monsterid&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/7b9657262458e754e6e51a10396868dafe6afa60d649dffcd4d52a5fc01aaa7d?s=96&d=monsterid&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/7b9657262458e754e6e51a10396868dafe6afa60d649dffcd4d52a5fc01aaa7d?s=96&d=monsterid&r=g","caption":"\u30a8\u30f3\u30bf"},"description":"After joining a major construction company specializing in slope stabilization, I went independent at the age of 32. With so much free time on my hands, I started a blog. I\u2019ve been sharing my expertise on slope stabilization and answering all kinds of questions. As a result, I\u2019ve seen an increase in inquiries, questions, and orders from slope stabilization contractors, general contractors, and other major construction firms. My traffic on Ameblo grew to a reasonable level, so I decided to move on from Ameblo by acquiring my own domain in order to create a more user-friendly blog. I plan to continue sharing all my expertise openly and honestly here. I look forward to your continued support.","sameAs":["http:\/\/enta-d.co.jp\/","https:\/\/www.facebook.com\/norimenman\/","https:\/\/www.instagram.com\/enta.d\/","https:\/\/x.com\/norimenman","https:\/\/www.youtube.com\/c\/entadnorimenman"]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/norimen.net\/iron-cut-bit-before-after\/#local-main-organization-logo","url":"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2016\/10\/site_title_logo.png","contentUrl":"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2016\/10\/site_title_logo.png","width":220,"height":50,"caption":"\u65b0\u30a8\u30f3\u30bf\u306e\u6cd5\u9762\u7ba1\u7406\u587e"}]}},"jetpack_likes_enabled":true,"jetpack_sharing_enabled":true,"publishpress_future_action":{"enabled":false,"date":"2026-10-11 00:01:14","action":"change-status","newStatus":"draft","terms":[],"taxonomy":"category","extraData":[]},"publishpress_future_workflow_manual_trigger":{"enabledWorkflows":[]},"jetpack_featured_media_url":"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/03\/2019-11-13-14.52.44.jpg","_links":{"self":[{"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/posts\/44865","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/comments?post=44865"}],"version-history":[{"count":2,"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/posts\/44865\/revisions"}],"predecessor-version":[{"id":64233,"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/posts\/44865\/revisions\/64233"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/media\/43884"}],"wp:attachment":[{"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/media?parent=44865"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/categories?post=44865"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/norimen.net\/en\/wp-json\/wp\/v2\/tags?post=44865"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}![\"Steel-Cutting](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2021\/07\/2021-07-20-08.38.08.jpg\")
<\/p>\n