![\"Spray-Applied](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2020\/06\/RIMG3130.jpg\")
<\/p>\nHello, everyone.<\/p>\n
This is Enta.<\/p>\n
When you're working as a subcontractor, there are some areas where you just can't compete.<\/p>\n
It's just the name recognition of a major company, lol.<\/p>\n
<\/p>\n
There's no way I can win, but it still feels kind of frustrating.<\/p>\n
I think we have more experience with standard construction methods. (Specialized methods are a different story.)<\/p>\n
Even so, there\u2019s a world of difference between what the big companies say and what we say.<\/p>\n
Well, there's no point in trying to reach beyond my means\u2014I just have to keep overcoming the challenges right in front of me.<\/p>\n
The fact that I still find myself thinking things like this means I still have a long way to go. I\u2019ll keep working hard to improve.<\/p>\n
But that's beside the point.<\/p>\n
<\/p>\n
We received a question regarding the simultaneous installation of the frame and the mortar within the frame.<\/p>\n
I'm going to try writing about that.<\/p>\n
<\/p>\n
As far as I'm concerned, there's no problem. (This is just my personal opinion.)<\/p>\n
There are no guidelines that specifically state you must play in separate parts.<\/p>\n
Based on experience, when applying mortar within a formwork, we spray it all at once.<\/p>\n
I\u2019ve never been told anything by the local government, and I\u2019ve never had a request to spray like this rejected based on the construction plan.<\/p>\n
<\/p>\n
In terms of quality, since cold joints don\u2019t form at the interface between the frame and the cross-section within the frame, cracks are less likely to develop, right?<\/p>\n
After all, we're spraying the same mortar at the same time.<\/p>\n
If the specifications call for a formwork frame made of mortar with concrete inside the frame, we will change the concrete inside the frame to mortar with the client\u2019s approval and proceed with construction.<\/p>\n
Government agencies are more likely to approve requests if the amount is on the higher side.<\/p>\n
<\/p>\n
Some people say that it\u2019s impossible to measure the as-built dimensions of a legal framework, but that\u2019s not true\u2014it can definitely be done.<\/p>\n
If you absolutely must measure the formwork height, measure it while the formwork is being assembled, and then measure it again at the same location after the spray application; this will allow you to measure both the formwork height and the thickness of the sprayed material inside the formwork at the same time.<\/p>\n
There are countless ways to do this, depending on how you interpret it.<\/p>\n
<\/p>\n
However, the important thing to keep in mind when spraying inside the frame isThey tend to be relatively thin<\/span><\/strong><\/span>That's it.<\/p>\n Since they're blown at the same time, they appear visually thicker.<\/p>\n In such cases, ensure sufficient thickness by installing as many spacers as possible or by placing a spacer at the point that protrudes the most within the frame.<\/p>\n Please be careful about the thickness within the frame.<\/p>\n <\/p>\n This is just my personal opinion, but I firmly believe that simultaneous spraying is definitely the better option in cold regions with high moisture content or on slopes.<\/p>\n And I think the best method is to just let it blow without using a hair dryer attachment.<\/p>\n Whenever I see a slope like that, the surface is always damaged by frost heave.<\/p>\n The boundary between the frame and the area inside it is clearly defined.<\/p>\n I'll introduce that next time, too.<\/p>\n <\/p>\n In a situation like this, if someone else is already doing it, I\u2019d have the courage to give it a try, but as long as there are no issues with quality or the end result, I think it\u2019s worth experimenting with different approaches.<\/p>\n In fact, constructing both the frame and the interior simultaneously can shorten the construction schedule.<\/p>\n Construction is carried out based on the construction plan, so it comes down to how you (the supervisor) want to carry it out.<\/p>\n I believe our mission is to create high-quality products while adhering to the minimum requirements set forth in specifications and special notes.<\/p>\n <\/p>\n See you later.<\/p>","protected":false},"excerpt":{"rendered":" Hello, everyone. This is Enta. When you\u2019re working as a subcontractor, there\u2019s one thing you just can\u2019t beat. That\u2019s the name recognition of the big companies, lol. It\u2019s not like we stand a chance, but it\u2019s still kind of frustrating. I think we actually have more experience with standard construction methods\u2026<\/p>","protected":false},"author":2,"featured_media":41124,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[29],"tags":[61,290,292,360,394,3513],"class_list":["post-42032","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-frame-spraying","tag-61","tag-290","tag-292","tag-360","tag-pc","tag-3513"],"acf":[],"yoast_head":"\n![\"PC](\"https:\/\/norimen.net\/wordpress\/wp-content\/uploads\/2020\/06\/RIMG2996.jpg\")
<\/p>\n