{"id":40502,"date":"2019-11-15T16:11:20","date_gmt":"2019-11-15T07:11:20","guid":{"rendered":"https:\/\/norimen.net\/wordpress\/?p=40502"},"modified":"2026-05-17T06:39:09","modified_gmt":"2026-05-16T21:39:09","slug":"set-screw-vs-regular-screw","status":"publish","type":"post","link":"https:\/\/norimen.net\/en\/set-screw-vs-normal-screw\/","title":{"rendered":"The Difference from Regular Screws! Set Screws!!"},"content":{"rendered":"

Hello, everyone.<\/p>\n

This is Enta.<\/p>\n

Have you ever heard of a set screw?<\/p>\n

\"Screw<\/p>\n

This is it.<\/p>\n

They're often attached to our drilling machines and sprayers.<\/p>\n

What the heck is this?<\/p>\n

I'm sure some of you are thinking, \"What's the big deal?\" but this is actually very important.<\/p>\n

 <\/p>\n

Our machines vibrate due to engines, motors, and other components.<\/p>\n

When that happens, the bolt and nut come loose. (Well, that goes without saying.)<\/p>\n

Critical parts must never be loose. Doing so significantly increases the risk of accidents and other incidents.<\/p>\n

That's when this set screw comes in handy.<\/p>\n

\"Accumulator\"<\/p>\n

This part is an accumulator, and it contains nitrogen gas (which is added later).<\/p>\n

Attach the rubber gasket and close the accumulator.<\/p>\n

\"Accumulator<\/p>\n

If it comes loose due to vibration, it could start to explode because there is gas inside.<\/p>\n

For that reason, this is a part that absolutely must not come loose.<\/p>\n

You tighten the main screw, then insert the set screws from the side to secure the main screw in place.<\/p>\n

\"Accumulator<\/p>\n

It may seem like just this small thing, but it\u2019s a very important point.<\/p>\n

 <\/p>\n

Sometimes, there are instances where the main bolt just won't come loose.<\/p>\n

In such cases, please take a close look at the sides of the bolt.<\/p>\n

There might be a set screw inside!<\/p>\n

 <\/p>\n

See you later.<\/p>\n

I've now got the hang of replacing the gas in accumulators and repairing them, lol.<\/p>\n

If you know our place, please do stop by lol<\/p>\n

We'll talk about accumulators next time.<\/p>\n

The final and most critical step in ground anchor installation is applying anti-rust oil to the head!<\/a><\/p><\/blockquote>\n